Pay attention to cleanliness when using the power unit

Pay attention to cleanliness when using the power unit

The use of the power unit system has brought convenience to industrial production, improved industrial production efficiency, and also promoted economic development. Then, the power unit should be filtered and clean in normal use. The specific precautions are shared by the power unit manufacturer.

1. The suction port filter should use a filter with low filtering precision and high current-carrying capacity. The suction filter with poor commodity circulation is very easy to cause cavitation. The suction filter is used to block large particles and air pollutants from entering the hydraulic pressure. Pump to avoid the air bubbles floating in the hydraulic oil from entering the system software. Gear pumps generally cannot use suction filters.

2. The pipeline filter is generally installed upstream and downstream of the more critical components, and the filtering precision should be higher than the gap between the friction pairs of the components. The servo control system pipeline filter cannot be used to bypass this product, and the filter element is resistant to working pressure. To be high.

3. The oil return filter has low pressure resistance. In the system software with thick hydraulic cylinders, the total flow through the filter must exceed the total flow of the pump. Pay attention to the total flow of the filter. The total flow of the filter must exceed the total flow of the pump. Multiplying the ratio of the total area of the front and rear left and right chambers of the piston rod of the hydraulic cylinder. The inside of the hydraulic system of the power unit is equipped with some basic working pressure rod and lever components. When the diastolic pressure occurs, the connected small hydraulic cylinders will carry out the work of transporting the working pressure oil, so that the mechanical kinetic energy can be used. It is very well converted into work pressure energy, showing that the driving force of the machine equipment* basis comes from. After a series of actual operations, the output hydraulic oil will promote the internal piston rod theme activity, so that the working pressure is converted into driving force. Most of the work on the hydraulic power unit is also completed.

The above is shared by the power unit manufacturers. Pay attention to the cleaning content of the power unit. Cleaning the power unit in time will make it smoother in use. If you want to know more about the power unit, you can pay attention to Huai’an Shengjie Hydraulic Machinery Co., Ltd. (Huai’an) Oumai Hydraulic Technology Co., Ltd.).